RACOM RAy11, Руководство пользователя

Страница: 28 / 177

Fig. 4.1: Link Configuration
Warning
During operation, never bring waveguides of both stations close to each other. There is a
risk of damaging sensitive input circuits.
4.1. Service access
RAy link is supplied with a default configuration of access parameters:
Unit L has the service IP address 192.168.169.169 and mask 255.255.255.0,
Unit U has the service IP address 192.168.169.170 and mask 255.255.255.0,
access is allowed over HTTP, HTTPS or SSH,
the username is
admin and the password is also admin .
On your PC setup an IP address that is within the mask, i.e. 192.168.169.180.
Then open the https configuration interface, e.g.
https://192.168.169.169
Other access options are described in the chapter Settings – Service Access of this manual.
When connection has been established, use the Settings – Service access – Services menu to customise
access parameters. Default IP addresses should be replaced with well-chosen operating addresses.
Leaving default addresses in place can lead to network problems later.
RAy Microwave Link – © RACOM s.r.o. 28
Step-by-step Guide