User Manual 2460 Series
Racal Instruments
2003
Programming The 2461 Module 4-25
*TST?
==> <result>
Description:
Execute a self-test on the module and returns the result. This command connects
the standard frequency in use to the counting input and takes frequency
measurements. Both UCT boards are tested. The test fails if the frequency
measurement differs from 10MHz.
Result:
= 0
Tests passed
= 1
Self-test failure, application board 1
= 2
Self-test Failure, application board 2
= 3
Self-test Failure, application board 1 and 2
Examples:
“*TST?” ==> 3: Self-test Failure in application board 1 and 2.
“*TST?” ==> 0: Tests passed.
“*TST?” ==> 1: Self-test Failure in application board 1.
*TRG
Description:
It causes the UCT to switch from the Idle to the Initiated state.
If the Manual Totalize function is currently selected the *TRG command switches the
state of the Manual Totalize, i.e. it is started if the state was off, or it is stopped if the
state was on.
Example:
“*TRG”:
Forces the UCT to the Initiated state.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com