Quectel 5G Module Series Скачать руководство пользователя

Страница: 78 / 86

5G Module Series

RM500Q-GL Hardware Design

RM500Q-GL_Hardware_Design 77 / 85

Figure 36: Thermal Dissipation Area Inside and on Bottom Side of the Module (Unit: mm)

There are other measures to enhance heat dissipation performance:

⚫

Add as many ground vias as possible on the PCB.

⚫

Maximize airflow over/around the module.

⚫

Place the module away from other heating sources.

⚫

Module mounting holes must be used to attach (ground) the device to the main PCB ground.

⚫

It is NOT recommended to app

ly solder mask on the main PCB where the module’s thermal

dissipation area is located.

⚫

Select appropriate material, thickness and surface for the outer housing of the application device that

integrates the module (i.e., the mechanical enclosure) to enhance thermal dissipation ability. You

may also need active cooling to dissipate heat of the module.

⚫

If possible, add a heatsink on the top of the module. A thermal pad should be used between the

heatsink and the module, and the heatsink should be designed with as many fins as possible to

increase heat dissipation area.

If a conformal coating is necessary for the module, do NOT use any coating material that may chemically

react with the PCB or shielding cover, and prevent the coating material from flowing into the module.

NOTE

Содержание 5G Module Series























































































Результаты поиска

Содержание 5G Module Series

Отзывы:

Похожие инструкции для 5G Module Series

Бренды по названию

Популярные бренды

Quectel 5G Module Series, Проектирование аппаратного обеспечения

Результаты поиска

Содержание 5G Module Series

Отзывы:

Похожие инструкции для 5G Module Series

Бренды по названию

Популярные бренды