Quectel 5G Module Series Скачать руководство пользователя

Страница: 38 / 86

5G Module Series

RM500Q-GL Hardware Design

RM500Q-GL_Hardware_Design 37 / 85

Parameter

1. Hot-plug function is invalid if the configured value of

<insert_level>

is inconsistent with hardware

design.

2. Hot-plug function setting takes effect after the module is restarted.

3. The underlined value is the default parameter value.

4. USIM_DET[1:2] is pulled LOW by default, and will be internally pulled up to 1.8 V by software

configuration only when (U)SIM hot-plug is enabled by

AT+QSIMDET

4.1.3. Normally Closed (U)SIM Card Connector

With a normally closed (U)SIM card connector, USIM_DET pin is shorted to ground when there is no

(U)SIM card inserted. (U)SIM card detection by high level is applicable to this type of connector. After

executing

AT+QSIMDET=1,1

to enable the (U)SIM hot-plug: when a (U)SIM card is inserted, USIM_DET

will change from low to high level; when the (U)SIM card is removed, USIM_DET will change from high to

low level.

⚫

When the (U)SIM is absent, CD is shorted to ground and USIM_DET is at low level.

⚫

When the (U)SIM is present, CD is open from ground and USIM_DET is at high level.

Characteristics

The command takes effect after the module is restarted.

The configuration will be saved automatically.

<enable>

Integer type. Enable or disable (U)SIM card detection.

0 Disable

1 Enable

<insert_level>

Integer type. The level of (U)SIM detection pin when a (U)SIM card is inserted.

0 Low level

1 High level

NOTES

Содержание 5G Module Series























































































Результаты поиска

Содержание 5G Module Series

Отзывы:

Похожие инструкции для 5G Module Series

Бренды по названию

Популярные бренды

Quectel 5G Module Series, Проектирование аппаратного обеспечения

Результаты поиска

Содержание 5G Module Series

Отзывы:

Похожие инструкции для 5G Module Series

Бренды по названию

Популярные бренды