Quantum SDLC 2.7, Справочное руководство

Страница: 292 / 324

274 Application Notes
395 The accessor could not move on the horizontal (X) axis
396 Could not home the horizontal (X) axis
397 The accessor lost power
398 Internal target failure
399 A drive did not load or unload a tape
400 Cannot lock the I/E station
401 Cannot unlock the I/E station
402 Label too short, too long or duplicate
403 Cannot read a barcode label due to scanner problem
404 Firmware error
405 Parameter list length error (Illegal Request).
406 Illegal operation code in CDB (Illegal Request).
407 Invalid element address in CDB (Illegal Request).
408 Attempt to write a read only buffer (Illegal Request).
409 Illegal LUN (Illegal Request).
410 Invalid field in Parameter List (Illegal Request).
411 Invalid parameter in Parameter List (Illegal Request).
412 Parameter data checksum failure (Illegal Request).
413 Incompatible media installed (Illegal Request).
414 Source of MOVE MEDIUM command cannot be accessor (Illegal Request).
415 Cartridge stuck in tape drive (Illegal Request).
416 Source cartridge loaded into tape drive and not accessible (Illegal Request).
417 Media type does not match destination media type (Illegal Request).
418 Invalid bit in "Identify" message (Illegal Request).
419 Incorrect LUN configuration (Illegal Request).
420 Firmware detected an internal logic failure (Illegal Request).
421 Cartridge rejected in the Insert/Eject station because it was not properly loaded (Illegal
Request).
422 Cell status and barcode questionable (Illegal Request).
423 Medium removal prevented because storage element is unavailable (Illegal Request).
424 Cartridge magazine is not installed (Illegal Request).
425 Data transport device is not installed (Illegal Request).
Table 36 Error Codes (Continued)
Error Code Description