Quantum SDLC 2.7, Справочное руководство

Страница: 126 / 324

108 Configuration Tab
Assign Media to Pool
The pop-up window allow assigning cartridges to the existing pool and unassigning the cartridges from it as
well.
Field/Button Icon Operation Description
Name Enter Pool name.
It recommended using Pxx for scratch pools and CLx
for clean pools.
Also refer to
Table 6 on page 16.
ID Supplied Pool identification number.
Media Pool type Supplied Pool type (data/clean)
Device Supplied Name of device (physical library) where the pool is
located.
Media Type Supplied The type of media contained in the pool. Refer to
Media Types on page 263.
Number of volsers Supplied The number of cartridges currently contained in the
pool.
Watermark Enter The minimal number of valid cleaning media the pool
should contain.
For clean pools only.
Maximum cleanings
per tape Enter The number of times the cleaning cartridge belonging
to the pool can be used.
For clean pools only.
Volsers Supplied The list of cartridges that are currently contained in the
pool. The cartridge state is also indicated.
Also refer to
Cartridge on page 103.
Assign/Unassign Click Pop-up Assign/Unassign window opens. Refer to
Assign Media to Pool on page 108.
Update Click Save the pool properties after edit.
Remove Click Remove the scratch pool (the cartridges remains in
the library).
Remove the clean pool (the cartridges remains in the
library).
Help Click Open online help for the current pane.
Note Pool names are unique for a logical library. Using the default name ensures uniqueness.