Quantum SDLC 2.7, Справочное руководство

Страница: 238 / 324

220 Service Tab
Figure 159 SNMP Service Configuration: Security
Edit Click Edit security settings for the community. Pop-up SNMP
Service Configuration dialog opens, see
Figure 159 on page
220.
Remove Click Remove community from list.
Accept SNMP
packets Select From all hosts means that the source host and list of
acceptable hosts are the source SNMP management system
and the list of acceptable management systems. No SNMP
packets are rejected on the basis of the name or address of
the source host or the list of acceptable hosts.
From these hosts means that the acceptable hosts enlisted the
acceptable SNMP management systems. When selected, only
SNMP packets received from the hosts in this list are
accepted. Otherwise, the SNMP message is rejected and an
authentication trap sent. This selection provides greater
security than using a community name, which might contain
many hosts.
Add Click Add new destination. Pop-up SNMP Service Configuration
dialog opens, see
Figure 157 on page 218.
Edit Click Edit destination. Pop-up SNMP Service Configuration dialog
opens, see
Figure 157 on page 218.
Remove Click Remove destination from list.
Update Click Save SNMP properties after edit.
Start SNMP Click Start SNMP service (active when SNMP service is stopped ).
Stop SNMP Click Stop SNMP service (active when SNMP service is started ).
Help Click Open online help for the current pane.
CAUTION
If all the community names will be removed including the default name
‘Public’, SNMP will not respond to any community names presented.
Field/Button Icon Operation Description