Quantum SDLC 2.7, Справочное руководство

Страница: 266 / 324

248 Tools and Utilities
Scalar DLC Software Licensing
The Scalar DLC software will run for a “grace period” of 30 days after installation without a license.
Thereafter, a license key is required to keep the software running. This key should be obtained by contacting
GCC before the 30-days trial period expires.
To request a license, contact GCC by either email or fax.
• Send the license request by email from the license application module.
• Print the license request text file, license.lic, and provide the file to GCC.
The Licensing tool is used for both Scalar DLC Basic solution ( Standard License on page 248 and Failover
solution ( Cluster License on page 253).
Standard License
Refer to Obtaining License on page 248 to request a Scalar DLC license.
The license request can be sent either by email or fax. For a fax, the file is located at
<%SystemDrive%>\Program Files\ADIC\SDLC\docs\license.lic.
Once the license request is received and is validated, a license string is sent back to the sender to be
entered into Scalar DLC software.
Refer to Installing License on page 252 for registering the Scalar DLC license.
Obtaining License
The Scalar DLC license request can be resolved in one of two ways. During the installation process, execute
the ADIC Licensing application and click
Request .
The Licensing dialog is also available through Start > Programs > ADIC Distributed Library Controller
> ADIC Licensing.
Figure 194 Licensing Dialog
List Operation Description
Request Click Request a license string. See Figure 196 on page 249.
Register Click Install the license string. See Figure 200 on page 252.
Cancel Click Clear the dialog and exit.
About Click Provide a brief description of the license wizard. See Figure 195 on
page 249.