Quantum Scalar 50, Руководство пользователя

Страница: 130 / 290

Chapter 3 Quantum Scalar 50 Remote Management
Setup
Quantum Scalar 50 User’s Guide 106
Table 29 Creating a Partition
Field Description
Partition Name
Enter a unique name for the partition. Partition
names must start with a letter (a-z or A-Z), cannot
be longer than 10 characters, and cannot contain
spaces or special characters. Library, Global, and
Unassigned are reserved and cannot be used.
Cabinets Select an available cabinet.
Magazines Select one or more magazines from the
unassigned magazine list and move it to the
assigned magazine list. A partition MUST contain
at least one magazine.
Drives
Select a drive or drives from the unassigned
drives list and move it to the assigned drive list. A
partition MUST contain at least one drive.
SCSI Logical
Unit (LUN)
Enter the SCSI logical unit number for this
partition. Each partition must have a unique LUN
designation. The default number is 0.
Load Port
Select a load port from the load port list if
required for this partition. Load port elements can
be shared across multiple partitions.
Enable
Autoclean Select this box to automatically clean the drives in
the partition when needed.
Emulate
P-Series Select this box to return an P-Series inquiry string
to the host connected to this partition. The
partition will appear to the host as an P-Series
tape library.
Emulate Scalar
50 Select this box to return an Scalar 50 inquiry string
to the host connected to this partition. The
partition will appear to the host as an P-Series
tape library.
Enable Barcode
Swap
Enables/disables swapping media type prefix
from the back of barcode to the beginning.