Quantum Scalar 50, Руководство пользователя

Страница: 80 / 290

Chapter 2 Basic Library Operations
OCP Components
Quantum Scalar 50 User’s Guide 56
The
Network
screen allows you to view or edit the following network
settings:
• DHCP (default setting)
• IP address
• Subnet mask
• Default gateway
• Ethernet 0
2 Use the up and down arrows to select the network setting you wish
to view or edit and press
Enter
.
a To enable/disable DHCP, press
Yes
to enable DHCP or
No
to
disable DHCP. If your library is not connected to a network
which uses a DHCP server to assign IP information, disable this
function.
b To set the IP address, subnet mask, and gateway, use the up and
down arrows to select the appropriate number and press
Enter
to
accept.
3 When you are finished viewing/editing the network information,
press
Exit
to return to the
Setup
screen.
Date and Time
2
To view or edit the date and time information:
1 From the
Setup
screen, use the up and down arrows to highlight
Date
and Time
and press
Enter
.
The
Date and Time
screen displays (see figure 40 ):
Note: The network settings (IP address, subnet mask, and
default gateway) are only active when DHCP is disabled.
Note: For the network information such as the IP address to be
active, the library must reboot. To reboot the library, see
“Reboot Library” on page 126.