Quantum Scalar 50, Руководство пользователя

Страница: 49 / 290

Chapter 2 Basic Library Operations
Installing Tape Cartridges
Quantum Scalar 50 User’s Guide 25
Place the label in the slide-in slot on the front of the cartridge (see
figure 10 ).
Figure 10 Inserting a Barcode
Label (SDLT)
Slide-in slot
Setting the Write-Protect Switch
2
Each tape cartridge has a write-protect switch similar to that shown in
figure 11 . This switch determines whether new data can be written to the
cartridge ( write-enabled ) or whether data on the cartridge is protected
from being erased or overwritten ( write-protected ). Set the write-protect
switch to enabled when inserting new cartridges into the library. Set the
write-protect switch to protected archiving tape cartridges.
Note:
You cannot choose the sequence of labels inside the bar code
label packs. No two packs are ever the same to avoid issues
with duplicate bar code IDs.
Note: Only use barcode labels that have been designed for
cartridges. Do not adhere labels to a cartridge anywhere
except the slide-in slot.