Quantum Scalar 50, Руководство пользователя

Страница: 46 / 290

Chapter 2 Basic Library Operations
Installing Tape Cartridges
Quantum Scalar 50 User’s Guide 22
3 Place cartridges (right side up) in the fixed slots and magazines:
a Open the library doors (see “Library Operations” on page 45 to
open the library doors).
b Remove the magazines (see “Library Operations” on page 45 to
release the magazines).
c Load the tape cartridges in the magazines and fixed bins. It is
recommended to start loading tape cartridges in magazine 1, bin
0000 (see
figure 2 on page 3 and figure 3 on page 4 for magazine
and bin locations).
Warning: Do NOT reach into the library to load tape cartridges
into the fixed bins. Use the
Move
page located on the
Operations
tab from the remote management pages
(see chapter 3 on page 63) to move tape cartridges
from the magazines into the fixed bins.
d Replace the magazines in the library.
e Close the library doors.
Caution: Placing the cartridges in the bins upside down can
cause damage to the library (see
figure 11 for SDLT
cartridges and figure 12 for LTO cartridges).
Caution: Handle tape cartridges with care. Do not drop or bang
them, or place them near sources of electromagnetic
interference. Rough handling can displace the tape
leader, making the cartridge unusable and potentially
hazardous to the tape drives. If a tape is dropped,
discard and replace with a new tape. Loss of data
could result from damaged tape cartridges inserted in
tape drives.
Note: You have approximately 10 seconds to open the doors and
remove the magazines. If you did not complete the
operation, repeat the steps.