Quantum P1000 Series, Руководство пользователя, Страница: 95 / 132

Chapter 5 Service Commands
Testing the Library
ATL P1000 Series User’s Guide 79
Testing the Library
5
The Test section of the Service screen provides three options:
•
SysTest Library
•
Operate Axes (not currently supported)
•
Service Calibrate
Note: The commands in the Test section of the Service screen are operational
only when the library is in Standby mode.
Performing a System
Test
5
To perform a system test:
Procedure
1
On the Service screen, press the SysTest Library button.
The GUI displays the Test: SysTest Library screen (see figure 51).
Figure 51 Test: SysTest
Library Screen
2
Select one of the following system test options:
• To test storage bins only, press the Swap Bins button.
•
To test drives only, press the Swap Drives button.
•
To test both bins and drives, press both the Swap Bins and
Swap Drives buttons.
System
Off-line
Standby
Load Port
Load Pack
Back Forward Home
S
Test: Systest Library
Select
Execute
Use
Barcodes
9 0
7 8
5 6
3 4
1 2
Stop
Random
Swap
Bins
Swap
Drives
_
Continuous
# of Runs:
ATL
P R O D U C T S
Service Tapes Operator