Quantum P1000 Series, Руководство пользователя

Страница: 81 / 132

Chapter 4 Operator Commands
Moving a Cartridge
ATL P1000 Series User’s Guide 65
Procedure (continued)
2
Identify the source element (the element containing the cartridge
to be moved):
a
Press the appropriate element button (Storage Bin, Tape Drive,
Load Port, or Gripper).
The GUI displays a range of addresses in the Range box (below
the Destination box).
b
Using the keypad, enter the address of the source element.
If you make a mistake inputting the address, press the
backspace button to erase the entry character by character.
c
Press the Select button.
The Source box displays the source information and the
Destination box becomes active.
3
Identify the destination element:
a
Press the appropriate element button (Storage Bin, Tape Drive,
Load Port, or Gripper).
The GUI displays a range of addresses in the Range box (below
the Destination box).
b
Using the keypad, enter the address of the source element.
If you make a mistake inputting the address, press the
backspace button to erase the entry character by character.
The destination information appears in the Destination box as
you type.
4
Press the Execute button to initiate the move.
The GUI displays a “Command In Progress” screen. When the
move is complete, the “Command In Progress” screen disappears.
To cancel the move, press the Abort button on the screen.
5
Press the Back button to return to the Operator screen.