Quantum P1000 Series, Руководство пользователя, Страница: 51 / 132

Chapter 2 Installing the P1000 Library
Connecting Host Computers
ATL P1000 Series User’s Guide 35
Connecting Host Computers
2
You are now ready to connect one or more host computers to the
library. You can connect up to five host computers on separate SCSI
busses.
Note: If your library is equipped with the Prism FC210 Router, disregard this
section. Instead, see the ATL PrismFC210 Router Addendum
(PN 6331101).
SCSI Cabling
Guidelines
2
When connecting the host computer(s) to the library, follow these
guidelines:
•
Connect each host to a SCSI connector on the back panel of the
library.
•
When more than one device is on a SCSI bus, daisy-chain the
devices using the SCSI cables from the accessories kit.
•
Terminate the last device on each SCSI bus.
Using these guidelines, you can set up variations of one-, two-, three-,
four-, or five-host configurations.
Note: The SCSI cable(s) to the host computer(s) must be supplied by the user.
SCSI Cabling
Examples
2
This section provides three SCSI cabling examples. Each of these
examples follows the guidelines introduced above.