Step 5: Install Centrify Samba
Installing the Centrify DirectControl Admin Console on a Windows System
58
Lattus A10 Access Node Installation Guide
• Verify Active Directory users and computers (using the previous
example, Users -> (account1, legal1 and qadmin), select the UNIX
Attributes tab, and select the Active Directory Domain (selab.local).
• Verify Active Directory Users and Computers (Users -> Domain
Users, Domain Admins and site Admin properties), making sure all
these groups are added to the UNIX Attributes tab. Also select the
Active Domain Domain (selab.local).
• In Centrify:
•
_quantum_sfu zone
(classic, Windows domain/NIS domain)
• To verify that Centrify is installed correctly, run the following
commands on the Lattus A10:
[root@se-a10 cifs]# /usr/bin/adinfo
Local host name: se-a10
Joined to domain: selab.local
Joined as: se-a10.selab.local
Pre-win2K name: se-a10
Current DC: se-ad.selab.local
Preferred site: Default-First-Site-Name
Zone: selab.local/Program
Data/Centrify/Zones/_quantum_sfu
Last password set: 2014-06-10 14:47:00 PDT
CentrifyDC mode: connected **MAKE SURE the ZONE
is CONNECTED **
Licensed Features: Enabled
[root@se-a10 cifs]#
/usr/share/centrifydc/bin/adcheck selab (domain
name)
[root@se-a10 cifs]# /usr/bin/adquery user account1
account1:x:10009:10004:account1:/home/account1:/bin/
sh
• On the Lattus A10 (se-a10.selab.local):
• If a sticky bit exists, remove it from the Stornext directory:
chmod -s /stornext/snfs1/cifs
• Add new samba share directories to the stornext file system
mkdir /stornext/snfs1/cifs/<samba-share-name>
chmod 777 /stornext/snfs1/cifs/<samba-share-name>