Quantum Lattus A10, Руководство по установке, Страница: 50 / 104

Step 4: Install and Configure Lattus A10 Software and NAS Services
Creating Namespaces
36 Lattus A10 Access Node Installation Guide
Creating Namespaces
Tasks: Create two namespaces:
• Namespace1 is for the Lattus A10 backup.
• Namespace2 is for Lattus A10 user data. You can create both
namespaces in a single step.
Note: This section applies to the AXR REST interface only. If the S3
interface is used, refer to Creating Lattus S3 Buckets on
page 38.
Namespace for Lattus
A10 Backup
Complete the following steps:
1 From the Dashboard , navigate to the Administration > Storage
Management > Namespaces page.
2 On the Commands pane, click Add namespace to open the
Namespaces dialog box.
3 From the Number of namespaces drop-down menu, select
2 Namespaces .