Step 4: Install and Configure Lattus A10 Software and NAS Services
Creating Lattus S3 Buckets
38
Lattus A10 Access Node Installation Guide
a
Enter the following for Namespace 1:
i)
Name
: Enter
NS_BACKUP
.
ii) DSS Policy
: Set this to the name of the policy you configured
on page 33 for user data. For example:
dss_pol_20_4
.
iii)
MetaStore
: Depending on the metastores configured in the
system, select the metastore to use for the Lattus A10 Backup.
Lattus A10 Backups take very little space, but should be
accounted for. Selecting
Automatic
from the
MetaStore
drop-
down menu automatically selects the metastore with the most
amount of free space.
Namespace for Lattus
A10 User Data
b
Enter the following for Namespace 2:
i)
Name
: Enter
NS_DATA1
.
ii)
DSS Policy
: Set this policy to the name you configured in
on page 33 for user data. For example,
dss_pol_20_4
.
c
iii)
Metastore
: Depending on the metastores configured in the
system, select the metastore to use for user data. Selecting
Automatic
from the
Metastore
drop-down menu automatically
selects the metastore with the most amount of free space.Click
Next
to save the namespaces.
Creating Lattus S3 Buckets
This section describes how to create Lattus S3 buckets for the S3
interface.
S3 Over HTTPS
HTTPS must be enabled before you can create buckets over HTTPS. This
means you must create or import a Lattus Object Storage security
certificate prior to creating Lattus buckets. The certificate applies to