Step 4: Install and Configure Lattus A10 Software and NAS Services
Configuring objs.conf
50
Lattus A10 Access Node Installation Guide
This sets truncation on files on a specific directory.
Quantum recommends that
you do not change these
Configure Email
Notification
Follow these steps to configure Email notification:
1
Choose
Email Server
from the Tools menu.
2
Enter the
SMTP Server
information
3
Select the
Authentication Method
.
4
Enter the
Sender Email
address. (Obtain this information from the
customer.)
5
Check
Send Test Email
to test the email configuration.
6
Click
Apply
to finish Email configuration. If you checked
Send Test
, you should receive a test email at the email address you
entered.
Caution:
parameters unless you're fully aware of what you're doing.
Test the Lattus Object
Storage Configuration
Follow these steps to test the Lattus Object Storage Configuration:
1
Copy a test file to the source directory:
# cp /usr/cvfs/bin/snpolicy /stornext/snfs1/data1
2
Wait for a few minutes, and then run this command:
/usr/cvfs/bin/snpolicy
The output should look similar to the following:
/stornext/snfs1/data1/snpolicy
policy: 2294459 inode: 42764366
flags: OBJECT_ID
mtime: 2012-10-21 20:57:41.331477774 CDT
ingest: 2012-10-21 20:57:41.331477774 CDT
size: 1675472 disk blocks: 3584
seqno: 3 blk seqno: 1
objs-id: objs1