Chapter 9: Configuration
Scheduler
Quantum DXi6900 User’s Guide
285
Because of this, you may need to sum the values for all slave devices in the bonded interface to
calculate the overall outgoing traffic rate.
l
The replication throttle bandwidth maximum is specified in KB/s or MB/s, so depending on the statistic
or report you are observing, you may need to convert the bandwidth maximum to Kb/s or Mb/s in order
to correctly compare it to the observed values.
Scheduling E-mail Reports
The DXi6900 can automatically generate a report with system status data or with configuration data and
send it to all configured e-mail recipients.
Note:
To enable the DXi6900 to send e-mail, you must specify an outgoing e-mail server (see
). In addition, you must specify one or more recipients (see
).
To configure a schedule for e-mail reports:
1. On the
Scheduler
page, add or edit an event in the
Email Reports
).
2. In the
Report Type
drop-down box, select the type of e-mail report to schedule (
Status
or
Configuration
).
3. (Optional) Specify when and how often the event reoccurs (see
Setting Recurrence for a Scheduled
).
4. Click
Apply
.
Scheduling Healthchecks
During healthchecks, the DXi6900 performs tests to verify the health and integrity of the data deduplication
blockpool. Schedule healthchecks regularly to make sure the system is healthy and operating correctly.
When you schedule healthchecks, only the healthchecks that are currently enabled are run.
Note:
For more information about enabling healthchecks, see
.
To configure a schedule for healthchecks:
1. On the
Scheduler
page, add or edit an event in the
Healthchecks
).
2. Specify when and how often the event reoccurs (see
).
Caution:
For correct system operation, healthchecks
must
be run at regular intervals (at least once
a week).You can schedule healthchecks to occur daily or weekly but not monthly or yearly. Also,
recurrence is required.
3. Click
Apply
.
