Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide
307
DNS Suffix Search List
(Optional) The domain list to search when resolving domain names.
The list may be either a single domain name or a comma-separated list of up
to 6 domain names. The first domain name listed is used as the local
domain. Domain names must contain only letters [ A–Z, a–z ], numbers [ 0–
9 ], dots [ . ], and hyphens [ - ].
Primary, Secondary, and
Tertiary DNS IP Address
(Optional) The IP addresses of up to three DNS servers used to resolve
domain names and translate them into IP addresses.
Note:
You must specify a DNS IP address if you plan to use hostname
format when configuring an NTP time server, outgoing e-mail server,
replication sources and targets, and other information.
Configuring Bonding Details
Under
IP Address Configuration > Bonding Details
, configure bonded devices (see
):
Figure 191:
Network Page: Bonding Details
1. If necessary, click the
Show
link to show the bonding details table.
2. For each available bonded device (
bond0
,
bond1
, and so on), select two or more Ethernet ports with
the same link speed to assign to the bond. Or select
Not Bonded
to leave a port unassigned to any
bond.
If no ports are assigned to a bond, the bond cannot be configured. That is, settings cannot be entered
for the bond in the
Interface Details
or
IP Address
tables because no Ethernet ports are assigned to
the device.
All ports assigned to the same device are bonded together into a single logical port. For example, if you
select
bond0
for port
eth0
and port
eth1
, both ports are bonded together in the
bond0
device. A
bonded device can contain two or more ports.
All ports associated with a bond must have the same link speed (1GbE or 10GbE).
3. For each bonded device, specify the bonding mode:
