Chapter 9: Configuration
Notifications
Quantum DXi6900 User’s Guide
302
agent is accessible from any IP address.
l
When entering IP addresses, never use an address that is in a reserved IP address range. To
see a list of reserved IP address ranges, click the quick tip icon
[?]
located near the IP address
field.
4. In the
Access Type
drop-down box, select the access type for the community:
Get
Allows SNMP get operations.
Get/Set
Allows both SNMP
get
and
put
operations.
5. Select the
Community status
check box to enable the community.
Or clear the
Community status
check box to disable the community.
6. Click
Apply
.
Editing a Community
Edit an SNMP community to change the IP address or access type for the community. You can also enable
or disable the community.
To edit a community:
1. Click
Edit
.
The
Edit SNMP Community
).
Figure 188:
Edit SNMP Community Page
2. (Optional) In the
Name
box, select a different community to edit.
3. Enter a valid
IP Address and Network Mask
pair.
A pair is valid if performing a logical bitwise
AND
operation on the IP address and the network mask
results in the IP address. See the table below for examples:
