Chapter 9: Configuration
Contacts
Quantum DXi6900 User’s Guide
352
Editing the Fibre Channel Port Type
Edit the port type to change the mode of a Fibre Channel port to initiator or target mode. You can change the
port mode only on inactive connections:
Additional Information
l
Before changing a Fibre Channel port type from initiator to target, unplug the Fibre Channel port wire
connection.
l
Before changing a Fibre Channel port type from target to initiator, un-map any host mapping on the
Fibre Channel port, and unplug the Fibre Channel port wire connection.
To edit the Fibre Channel Port type:
1. Select the port in the list and click
Edit
.
2. Select the new port mode (
Initiator
or
Target
) in the drop-down box,
3. Click
Update
.
Contacts
The
Contacts
page allows you to enter company information. You can also enter individual contact
information for primary and secondary contacts.
To access the
Contacts
page, click the
Configuration
menu, and then click the
Contacts
tab.
The
Contacts
page contains the following tabs:
l
l
Primary and Secondary on the next page
Company
The
Company
page allows you to enter information about the company and location of the DXi6900.
To access the
Company
page, on the
Contacts
page, click the
Company
).
