Chapter 9: Configuration
Scheduler
Quantum DXi6900 User’s Guide
279
Use the
Physical Device Discovery
page to perform the following tasks:
l
To discover an attached physical tape library and tape drives, click
Scan
. Attached physical libraries
display in the list.
l
To enable or disable a physical library, select it in the list, and then click
Enable
or
Disable
. (You can
also right-click a library to enable or disable it.)
l
To use a physical library, it must be enabled. If you enable or disable a library, all tape drives in the
library are also enabled or disabled.
l
To view the drives in an attached library, select the library in the list. All drives in the selected library
display below.
l
To enable or disable tape drives, select one or more drives in the list, and then click
Enable
or
Disable
. (You can also right-click a drive to enable or disable it.)
Note:
To use a tape drive, it must be enabled. To enable a drive, the parent library must be
enabled.
l
To remove a physical library from the list, first disconnect the Fibre Channel cables that connect the
library to the DXi6900, and then click
Scan
.
l
To update the libraries or drives list with the latest information, click
Refresh
.
Scheduler
The
Scheduler
page allows you to manage scheduled events on the DXi6900, including replication and
replication throttling, e-mail reports, healthchecks, and space reclamation. With schedules, you specify
when certain events should occur, and the system automatically performs those events at the specified time.
Events can be one-time only, or they can reoccur at defined intervals.
To access the
Scheduler
page, click the
Configuration
menu, and then click the
Scheduler
tab (see
).
