QuadroM QuadroM32x, Руководство по установке

Страница: 6 / 55

QuadroM32x Manual I: Installation Guide About This Installation Guide
About This Installation Guide
This Installation Guide explains the installation of the QuadroM32x IP PBX. It gives step-by-
step instructions to provision the QuadroM32x and configure the phone extensions. After
successfully configuring the Quadro, a user will be able to make SIP and local PBX calls,
as well as calls to the PSTN and access the Internet from devices connected to the LAN.
This Installation Guide does not provide advanced configuration information. For these fea-
tures, refer to the Administrator's and Extension User's Guides.
Step 1: Installing the Quadro
explains the connection of cables and devices to the Qua-
dro.
Step 2: Configuring the Quadro describes the configuration steps necessary to integrate
the Quadro into your network environment.
Step 2-A: Using IP Lines explains how to configure IP lines on the Quadro IP PBX and to
connect IP phones.
Step 2-B: Using Receptionist refers to the document describing Receptionist’s configura-
tion on the Quadro.
Step 2-C: Configuring the E1/T1 Settings describes the basic E1/T1 settings.
Step 3: Registering on Epygi’s Technical Support shows you how to access the Epygi
Technical Support Center and the Epygi SIP Server.
Appendix: Changing the Admin Password explains how to change the default administra-
tor password.
Appendix: Configuring NAT Traversal explains configuration of the Quadro if it is placed
behind a NAT enabled router.
Appendix: Registering on Epygi’s SIP Server explains how to register on Epygi's powerful
SIP server.
Appendix: Checking the Connections gives hints on solving common problems.
QuadroM32x; (SW Version 5.2.x)
6