QuadroM32x Manual I: Installation Guide
Step 2: Configuring the Quadro
Country drop down list is used to set the location where Quadro is located to support the
correct functionality of R2 signaling. For countries absent in this list, use ITU selection.
Use Default Country Settings checkbox restores default advanced settings for the se-
lected country. When this checkbox is not selected, next page will provide a possibility to
manually configure advanced country settings.
Press Next to move to the fifth page of the CAS Signaling Wizard:
Fig. I-37: CAS Signaling Wizard - page 5
This page only appears when Use Default Country Settings checkbox is not selected on
the previous page and is used to configure advanced country settings.
ANI Category drop down list appears only when R2 signaling selected from Signaling
Type drop down list on the CAS Signaling Wizard – Page 2 is different from R2 DTMF
and is used to select the calling party priority depending on the call originator’s location
specifics.
ANI Request Transmit and ANI Request Receive drop down lists allow you to select the
Caller ID request R2 tones for transmit and receive.
Seize Acknowledge Timeout text field is used to define a timeout (in a range from 2 to
2000 milliseconds) between incoming seize signal and the corresponding feedback.
Answer Guard Timeout text field is used to define a wait timeout (in a range from 0 to
1000 milliseconds) Group-B Answer Signal and Line Answer.
Release Guard Timeout text field is used to define an idle timeout (in a range from 0 to
10000 milliseconds) between the disconnect signal receipt and call disconnection.
QuadroM32x; (SW Version 5.2.x)
40
Содержание QuadroM32x
Страница 1: ......