QuadroM32x Manual I: Installation Guide
Step 2: Configuring the Quadro
Editing the E1/T1 Trunk
Fig. I-28: Trunk Edit page
Select Network as your Interface Type if your QuadroM32x is connected to a PBX, other-
wise choose User.
Next, you are required to enter the Signaling type (CAS or CCS), adjust the correct inter-
face type (E1 or T1), and specify the requested settings of the selected interface type. The
appropriate parameters should be requested from the service provider or in case of con-
necting to a PBX - according to the settings in the PBX manual.
CAS signaling allows using the same timeslot both for voice and data transmission. CCS
signaling uses a single timeslot for signaling data transmission for the whole trunk, all other
timeslots are used for voice transmission.
E1, the European system, enables 30 active timeslots (both for CAS and CCS) to be used;
T1, the US system, enables 24 timeslots (if CAS is used) and 23 (if CSS is used).
Please Note:
Modifying the E1/T1 trunk settings may lead to some broken routes in the
Local Call Routing Table.
QuadroM32x; (SW Version 5.2.x)
31
Содержание QuadroM32x
Страница 1: ......