QuadroM32x Manual I: Installation Guide
Step 2: Configuring the Quadro
Step 2: Configuring the Quadro
Verify functionality of both IP and PSTN calls:
•
PSTN telephony: If the Quadro is connected to the PSTN network via the
E1/T1 interface, verify the functionality of PSTN calls:
o
Make an outbound PSTN call by dialing 9 + PSTN number.
o
Arrange to receive an incoming call. The incoming PSTN calls will be
routed to the Auto Attendant by default, and the caller has to enter a
valid extension number, e.g., 101, followed by the # sign to reach a
phone connected to the first PHONE port of the Quadro.
•
IP telephony: Dial 899# and you will hear a voice message that confirms you
have successfully established an IP call. If this call is not successful, go to
Appendix: Checking the Connections
for troubleshooting.
You may customize the following settings by logging in to the Quadro’s Web Management
(see Step 2.1):
•
Bandwidth - to regulate the number of calls allowed by the Quadro to avoid
degradation in low bandwidth conditions.
•
Time/Date - to ensure the correct time and time zone are used for call records.
•
Regional Settings - if your Quadro is located outside the United States, it is
important to properly configure your line connections to the PSTN in your loca-
tion.
•
Firewall - if your Quadro is connected behind a router with its own firewall ser-
vice running, disable the firewall to make Quadro accessible for management
purposes.
QuadroM32x; (SW Version 5.2.x)
15
Содержание QuadroM32x
Страница 1: ......
