QuadroM32x Manual I: Installation Guide
Step 1: Installing the Quadro
LAN/WAN Connection Options
•
A QuadroM32x IP PBX with an Ethernet WAN port behind a router, which is con-
nected to a cable or xDSL modem. IP phones are placed on the WAN side of the
QuadroM32x.
Fig. I-3: Configuration: QuadroM32x behind a router with IP phones on WAN
In this and the following configuration (Fig. I-3 and Fig. I-4), the IP router typically acts as a
DHCP server for the LAN and assigns the IP addresses to the PCs and other devices. The
Quadro can be connected through its WAN port directly to one of the router's LAN ports
and will get an IP address from the router. By default, the Quadro acts as a DHCP client on
the WAN port. The IP phones are placed on the WAN side of the QuadroM32x, connected
to the company LAN.
The Admin PC can be connected to the Quadro ETH or WAN port to access the Web Man-
agement of the Quadro.
Please note:
Since Quadro uses STUN by default, it will work with most basic routers
without any further configuration.
•
A QuadroM32x IP PBX with an Ethernet WAN port behind a router, which is con-
nected to a cable or xDSL modem. IP phones are placed on the LAN side of the
QuadroM32x.
Fig. I-4: Configuration: QuadroM32x behind a router with IP phones on LAN
This configuration (Fig. I-4) is identical to the previous configuration, with the difference that
IP phones are connected to the LAN port of the QuadroM32x. The QuadroM32x can be
configured as a DHCP server to provide the network parameters to the devices on its LAN.
QuadroM32x; (SW Version 5.2.x)
11
Содержание QuadroM32x
Страница 1: ......
