manualshive.com logo in svg

Quadro 3 2016, Руководство пользователя, Страница: 97 / 104

Поделиться
Скачать
Quadro 3 2016 Скачать руководство пользователя страница 97

95

PERIODS OF INACTIVITY

BATTERY

1) Remove the vehicle battery consulting section «

6.8 - Battery

».

2)  Thoroughly clean the outside of the battery with a light detergent and remove all signs of corrosion from the terminals 

and the wire connections.

3) Replace the battery in a cool dry environment.

4) Once a month, recharge the battery at 1.2 A x from 5 to 10 hours (using specific and adequate equipment).

TYRES

Inflate the tyres in accordance with the specific regulations.

MECHANICAL PARTS

If it is necessary to protect the mechanical parts with special substances (e.g. antirust products) contact 
an authorised Quadro dealership.

STARTING TO USE THE VEHICLE AGAIN

Before riding the scooter again after it has been laid up, do the following:

• 

check the tyre pressure and, if necessary, restore the pressure to what is shown in section «

5.2 – Tyre pressure

»;

• 

if it is flat, recharge the battery, then put it back on the scooter (see section «

6.8 - Battery

»);

• 

check the fluid levels and replace them if necessary;

• 

carry out an approximate check of the scooter's functions, especially the safety systems and lights;

If, after a period of inactivity, you encounter faults in the functioning of the scooter, contact an 
authorised Quadro dealership.

Содержание 3 2016









































































































Отзывы:

Нет отзывов