Quadro 3 2016 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 104

Quadro 3 2016 Скачать руководство пользователя страница 31

29

DESCRIPTION OF THE VEHICLE

IT IS ABSOLUTELY PROHIBITED

•

To start up the engine in internal environments. The exhaust gas produced by the engine contains carbon monoxide
and other volatile toxic substances which may be deadly if breathed in.

•

To drive the vehicle indoors or outside in areas where there is poor ventilation / air exchange.

•

To touch the hot engine or exhaust pipe.

•

To drive the vehicle under the influence of alcohol or drugs.

•

To drive the vehicle if you are less than eighteen years of age and without satisfying the legal requisites to do so.

•

To use non-genuine parts.

•

To carry out maintenance by non-authorised persons.

•

To carry out any maintenance operation while the engine is running.

•

To carry out any operations or adhere to standards of conduct not specified in this use and maintenance manual.

•

To drive off by mounting the vehicle still on its stand. In any case the rear wheel does not turn when it comes into contact
with the ground to avoid abrupt take off.

•

To adjust the mirrors while moving: you might lose control of the vehicle.

«
...
29
30
31
32
33
...
»

Содержание 3 2016









































































































Отзывы:

Нет отзывов