Quadro 3 2016 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 104

Quadro 3 2016 Скачать руководство пользователя страница 8

6

Read this manual before use

1.1 GENERALIT INFORMATION

Before you begin using the vehicle, you must read this instruction manual carefully and follow
all instructions it contains precisely.
The vehicle must not be used by persons who have not thoroughly read and understood the instructions contained in
this manual. This manual contains simple and clear descriptions of the operations necessary to understand and use your
vehicle, as well as recommendations for safe use of your vehicle in order to avoid personal injury. It also describes the main
maintenance operations and periodic checks which must be performed on the vehicle.

The guarantee of correct operation and safety of the vehicle strictly requires that all instructions contained in this manual
be applied.

The manual must always accompany the vehicle even when it is resold.

This Owner's Handbook is an integral part of the vehicle and it must therefore be kept in a safe place accessible to all
persons who might need to consult it.

If the manual is lost or damaged, request a new one from your dealer, giving them the vehicle specifications.

This manual is an integral and essential part of your vehicle.

INTRODUCTION

«
...
6
7
8
9
10
...
»

Содержание 3 2016









































































































Отзывы:

Нет отзывов