Quadro 3 2016, Руководство пользователя, Страница: 65 / 104

63
VEHICLE MAINTENANCE
Fig. 01
QSI0074
Fig. 02
QSI0042
CHECK
•
Wait 5 minutes from when the engine stops
•
Position the vehicle on the central stand on flat ground.
•
Unscrew the cap-dipstick « 1 - Fig. 02 » and clean it with a clean
cloth.
•
Screw the cap-dipstick up completely « 1 - Fig. 02 ».
•
Unscrew the cap-dipstick again « 1 - Fig. 02 » and check that the oil
level reaches the level midway between MIN and MAX indicated in
Fig. 01 .
Avoid running the engine with insufficient or
contaminated oil. Failure to comply with this rule could
damage the engine irreparably.
TOPPING UP
Any oil top ups must be done after checking the level (see what is
described in the "CHECK" part of this section).
If the oil level is lower than the MIN level, bring it up to the correct level
using the recommended oil.
•
Proceed as follows to top up:
•
Remove the cap and dipstick and add oil.
•
Check the quantity of oil reaches the level midway between MIN
and MAX ( Fig. 02 ).
MAX MIN