Quadro 3 2016 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 104

Quadro 3 2016 Скачать руководство пользователя страница 46

44

Fig. 01

QSI0031

4.19 CENTRAL STAND

Press the stand bracket «

1

» with your foot and at the same time pull the

vehicle backwards until it is on its stand.

Do not sit on the vehicle while the stand is on
the ground.
Make sure the vehicle is stable, only park on
stable ground

Fig. 02

QSI0032

4.20 EXHAUST SYSTEM

The vehicle has a catalytic converter «

2

». The owner is advised that the

law prohibits:

•

the removal and any modification of any device or element
incorporated in a vehicle to contain the noise or polluting emissions,
by anyone. Removal is only allowed for maintenance, repair or
substitution.

•

the use of the vehicle after the exhaust system has been removed
or made so it does not work.

The exhaust system must be checked to make sure it is working
properly, there must be no sign of rust or perforation. If the noise or
the smokiness produced by the exhaust system increase, contact an
authorized Quadro dealer.

Any tampering with the exhaust
system is prohibited.

(Fig. 01)

(Fig. 02)

DESCRIPTION OF THE VEHICLE

«
...
44
45
46
47
48
...
»

Содержание 3 2016









































































































Отзывы:

Нет отзывов