Quadro 3 2016 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 104

Quadro 3 2016 Скачать руководство пользователя страница 18

16

SAFETY PRECAUTIONS AND RECOMMENDATIONS

2.5 REFUELLING THE VEHICLE

While refuelling the scooter, always turn off the engine and check that there are no leaks in order to avoid breathing in
petrol fumes; do not smoke, do not use naked flames and do not use mobile telephones, as these may all ignite the highly
explosive fuel vapour, and check that there are no fuel leaks.

After refuelling, ensure that the fuel filler cap is closed correctly.

Contact a doctor immediately if fuel is swallowed or comes into contact with eyes or skin.

2.6 SAFE DRIVING

Quadro3 has been designed to transport the driver and a maximum of one passenger. Before driving you must perform
a general check on the condition of the scooter, particularly the safety systems, lights and tyres; if you should notice any
serious faults, consult an authorised Quadro dealer immediately.

While driving, the driver must keep both hands on the handlebars and the passenger must hold onto the handles at the
sides of the seat. Both the passenger and driver must keep both feet on the footrest while the scooter is in motion. We
therefore advise you do not transport passengers who are not able to keep their feet firmly planted on the footrest.

Both the driver and the passenger must sit in the right position that allows the driver to control all the functions of the vehicle
and does not involve an unbalancing of the load that could jeopardise the stability of the scooter.
Always transport the passenger on the rear of the seat.
Before setting off, allow the scooter to warm up and anyway do not push it to its maximum.

«
...
16
17
18
19
20
...
»

Содержание 3 2016









































































































Отзывы:

Нет отзывов