Quadro 3 2016, Руководство пользователя, Страница: 67 / 104

65
VEHICLE MAINTENANCE
6.5 FINAL DRIVE OIL
Fig. 01
Fig. 02
QSI0007
QSI0008
The final reduction oil must be changed at the intervals listed in the
scheduled maintenance table.
CHECK (Fig. 01)
Before use check that there are no oil leaks from the final drive box. If
there are, have the scooter repaired by an authorised
QUADRO dealer.
Let the engine cool before carrying out any operation
CHANGE (Fig. 02)
•
Switch on the engine, heat the final drive oil by running for a few
minutes, then switch off.
•
Put a sufficiently large receptacle under the drainage hole.
•
Unscrew the cap « 1 - Fig. 01 ».
•
Undo the screw « 2 - Fig. 02 », recover the washer and let the oil run
out completely.
•
Do up the screw « 2 - Fig. 02 » and using a syringe, inject the new
oil of the recommended type in the input hole up to the correct level.
Final drive oil: SAE 80W-90 (200 cm³)
Warning: hot oil.
Do not dump oil, dispose of only at authorised
facilities. Adhere to the current legislation in
each country for disposal.