Quadro 3 2016, Руководство пользователя, Страница: 76 / 104

74
VEHICLE MAINTENANCE
Fig. 01
QSI0060
CHECK (Fig. 01)
The liquid must be checked at the intervals listed in the scheduled
maintenance table.
To ensure the engine is functioning properly make sure
that the radiator grille is always clean.
Proceed as follows to check the liquid:
•
Position the vehicle on the central stand on flat ground.
•
Check through the inspection hole « 1 » under the floor that the liquid
is at the correct level indicated by the reference Top .
Fig. 02
QSI0061
TOPPING UP (Fig. 02)
To avoid getting burnt, do not undo the expansion tank
cap when the engine is still hot.
When the level of the liquid is below the LOW reference mark, lift
the foot rest mat « 2 », remove cap « 1 » of the tank « 3 » and top up if
necessary when the engine is cold.
Coolant : CUNA NC 956-16
If you find you frequently need to top up the coolant, you must have the
cooling system inspected by an authorised Quadro dealer or service
centre.