Quadro 3 2016 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 104

Quadro 3 2016 Скачать руководство пользователя страница 15

13

SAFETY PRECAUTIONS AND RECOMMENDATIONS

REFER TO FIG-

URE 01

TYPE OF STICKER

DESCRIPTION

1

Brake fluid

Clean the tank cap before use.
Only use DOT 4 brake fluid from a sealed container

2

General

- Carefully read the Use and Maintenance manual before setting off on the vehicle.
- Before driving off on the vehicle, make sure you have released the parking brake completely.
- Before driving off on the vehicle, make sure that the parking brake tell tale light is off.
- Only use the parking brake when the vehicle is parked.
- Never exceed the payload weight allowed and only use genuine Quadro accessories.
- Carry out a rough check of the functions before driving off.
- Always carry out a scheduled servicing and check once you have reached 1000 km.

3

- Radiator

- Do not open the radiator cap while the engine is still warm.
- Check the level of the tank constantly and top up with a 50 - 50% water/coolant solution.
- Read the quantities in the Maintenance manual.

4

Battery

- Do not use in places with naked flames present. The hydrogen gas generated by the battery could

cause fires and explosions.

- This 12v battery can only be used to start the motor. Do not use for other purposes.
- Keep out of the reach of children and persons who have not learnt the information from the instruction

manual. It may cause serious burns.

- When touching the battery, wear protective goggles and rubber gloves. Sulphuric acid could cause

blindness and serious burns.

- The battery, the poles of the battery, the terminals and the relative components contain lead and

lead compounds and chemical substances that could cause cancer and damage to the reproductive
system.

- The batteries contain other chemical substances that could cause cancer.
- Wash your hands after handling the battery.

5

Fuel

Only use unleaded petrol with less than 10% ethanol and with a minimum octane number 95 (RON).

6

Exhaust terminal

High temperature exhaust terminal: danger of serious burns if touched.

«
...
13
14
15
16
17
...
»

Содержание 3 2016









































































































Отзывы:

Нет отзывов