QMS Magicolor CX, Руководство пользователя

Страница: 97 / 222

Replacing
Consumables
3-21 Maintenance
4 Use the two green separator latches to tilt the pawl unit back.
M
WARNING! The fuser unit can become extremely hot and cause
severe burns. Make sure the unit is cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit einige
Zeit abkühlen, bevor Sie diese berühren.
5 Locate the cleaning pad in the slot above the fuser roller.
Then, while carefully avoiding the surface of the fuser unit,
which may be hot, grasp the pad by its green tab (towards
the rear of the unit), pull it out of the printer, and discard it.
6 Remove the cleaning pad and oil bottle from their protective
bags.
▲
Caution: The fuser unit is an integral part of the color imaging
process and is also very expensive to replace. The fuser life will
be shortened or the fuser permanently damaged if the cleaning
pad is not installed properly or if proper care is not taken to
change the cleaning pad and oil bottle when needed. This type of
damage is not covered under warranty or service contract.
The first oil bottle and cleaning pad will last approximately 1,500
pages. After that, they will last approximately 3,000 pages.
Latches
Front View
Cleaning- Pad Tab