QMS Magicolor CX, Руководство пользователя

Страница: 164 / 222

Printer Status
Messages
QMS magicolor CX User's Guide 4-22
FUSER OIL LOW
The oil bottle for the fuser unit is
running low and the cleaning pad is
wearing out. If you have a new oil-
bottle/pad kit on hand, you may want to
replace them now. (See chapter 3,
“Maintenance,” for information on
replacing them.) If not, order a
replacement kit now. A limited number
of copies (approximately 100) will still
run. However, when the oil runs out,
the printer stops and the
ADD FUSER
OIL AND REPLACE PAD
status
message appears.
ADD FUSER OIL
AND REPLACE PAD
The oil bottle for the fuser unit is empty
and the cleaning pad needs to be
replaced. The printer will not run any
more copies until they are replaced.
(See chapter 3, “Maintenance,” for
information on replacing the oil bottle
and cleaning pad.)
IDLE
No jobs are in progress.
IDLE INPUT PRINTING
The system is on line and printing
previously accepted jobs. No new jobs
are arriving at the communication
interfaces.
INNER JAM
Media has jammed leaving the OPC
belt cartridge area. Remove the jam
(see “Clearing Inner Jams” on
page 30).
INITIALIZING
The printer is warming up and getting
ready to go on line.
MISFEED JAM
Media has jammed leaving the media
cassette. Remove the jam
(see“Clearing Misfeed Jams” on
page 27).