QMS Magicolor CX, Руководство пользователя

Страница: 189 / 222

Testing Printer-
to-Host
Communication
4-47 Troubleshooting
To find out what the printer's serial settings are, check the printer's
start-up page, which printed out when you first turned it on. It lists the
printer's current serial port settings. To change them to match the PC
serial settings, use the printer control panel as described below:
1 Press the printer control panel Online/Offline key to make
the Online LED go out.
2 Press the Menu key to enter the top-level menu, then press
the Next key until the message window displays
OPERATOR CONTROL
ADMINISTRATION
3 Press the Select key to enter the Administration menu, then
press the Next key until the message window displays
ADMINISTRATION
COMMUNICATIONS
4 Press the Select key to enter the Communications menu,
then press the Next key until the message window displays
COMMUNICATIONS
SERIAL
5 Press the Select key to enter the Serial menu, then press the
Next key until the message window displays
SERIAL
BAUD RATE
6 Press the Select key to enter the Baud Rate menu.
The message window displays the currently selected baud rate (*
represents a default setting):
*
9600 BAUD
7 Press the Next key until the correct baud rate is displayed.
» Note: Baud rates of 19200 and 38400 require that both RTS and
CTS hardware flow control (Hdwe Flow Ctl) be selected. These
baud rates do not support XON/XOFF software flow control (Rcv
Sw Flow CTL).