QKM AH20, Руководство пользователя

Страница: 86 / 105

Chapter 6 Robot Operation
Document Version V1.0.1 (11-14-2022) 71
Solution to connection failure:
Step 1
Check whether the IP addresses of the host computer
and the robot are on the same network segment;
Step 2
Execute system search and run cmd as shown in the
figure:
Step 3
Directly input "ping" + IP after >. If the specific values of
the parameters of byte, time and TIL are returned, it
indicates that the network is connected as shown in the
figure.
(Note: The IP in the figure is just an example. The correct IP is
subject to the actual IP of the robot.)