QKM AH20, Руководство пользователя

Страница: 17 / 105

AH20 Robot User Manual
2 Document Version V1.0.1 (11-14-2022)
used beyond its specifications and load conditions, the service life of the
robot would be shortened, or the robot would even be damaged.
 Users should ensure that the robot operates under safety conditions.
There should be no objects around the robot, which may cause damage
to it. As the robot may be scratched and bumped due to the motion of its
movable mechanical parts, users should carry out risk assessment of the
operation environment on site and set up special facilities for protection.
 To prevent personnel from entering the motion area of the robot by
mistake, be sure to install a safety fence to stop personnel from entering
the dangerous area.
 When the ambient temperature is close to 0℃, operate the robot at the
speed of 10% or less for more than 10 minutes to preheat it; perform
other operations after preheating the robot.
 Detergents with strong corrosion are not suitable for cleaning the robot.
Anodized parts should not be cleaned by immersion.

Non-professionals shall not repair faulty products without permission.
Do not disassemble the electronic control cabinet arbitrarily. If the
product fails, please contact QKM Customer Service.
 Personnel responsible for installation, operation and maintenance of
QKM robot must receive rigorous training to understand all safety
precautions and proper methods of operation and maintenance before
operating and maintaining the robot.
 Users should carry out regular inspection and maintenance of the robot
according to the manual and related requirements and timely replace
damaged parts to ensure safe operation and service life of the robot.