Operating
screens
Operating manual HR9
– QS203263
65
Pattern settings layer processing
In this screen the restraint values are specified all restraints move to if the layer is on shuttle
plates.
The difference between 1st situation (Dimensions stacking plates) and 2nd situation
(Dimensions pallet);
1st situation is the position the restraints go to if the layer is on the shuttle plate.
2nd situation is the position where the shuttles go when the shuttle plates open.
With the shift you can set whether the layer should be squared from the centre.
When switching dimensions you set at which position (when stacking plates open) the
dimensions are changed (From situation 1 to 2).
