Operating
screens
92
Operating manual HR9
– QS21XXXX
Motion configuration stacking plates
Setting
Description
Nominal speed
Speed in meters per second at 50Hz
Precision
Number of millimetres that the current position may deviate from the
desired position
Positions
Setting
Description
Open
Position in open position that the drive can reach without encountering
any mechanical obstacles.
Closed
Position in closed position that the drive can reach without encountering
mechanical obstacles.
Speed profile restraints empty
Setting
Description
Speed profile
Speed of movements of entire layer processing when no layer is present
Percentage of Nominal speed. 100% = Nominal speed
Acceleration is in seconds, from standstill to desired speed.
Deceleration is in seconds, from actual speed to standstill.
Detection normal position of stacking plates
Setting
Description
Delay on/off
This sets the sensor delay.
As soon as the sensor gives a signal, this can be influenced by an ON
delay and OFF delay.
In that case, the sensor must be covered longer before the machine
actually receives the signal (ON delay); it is also possible to keep the
signal high while the sensor is already uncovered (OFF delay).
