Notifications
Operating manual HR9
– QS203263
135
No.
Action
Description
Cause
Solution
564
HOLD
Layerbuffer conveyor; Inverter
blocked / alarm active
The inverter drive is
malfunctioning. The inverter
drive always provides a fault
code in the event of a fault.
From this error code a short
description of the error is
given.
Example:
Fault code 8: Speed
monitoring
Check the current fault code in
the diagnostics menu.
You can find extensive
information and help regarding
this code
in the manufacturer’s
documentation
565
REFERENCE Layerbuffer conveyor; Not
referenced
Motor & inverter drive not
referenced.
Motor has lost position or has
been shown to be unreliable
due to
inverter drive faults
The referencing (homing)
cycle is started automatically
during machine reset
If the machine needs
confirmation regarding
position
of parts, a pop-up window will
appear
566
HOLD
Layerbuffer conveyor; No row
detected during transfer
Photocell did not detect any
row during infeed
Validate if a row is present,
please recover machine if data
is present and no physical
layer is present.
Validate proper photocell
operation
569
ABORT
Layerbuffer conveyor; Inverter
offline
Communication lost between
PLC and inverter / drive.
No connection established.
Warn technicians and OEM
Use diagnostics and
documentation to detect the
problem and how to solve it
Make sure the inverter & drive
have power available
570
HOLD
Layerbuffer restraints; Inverter
blocked / alarm active
See Alarm 564
See Alarm 564
571
REFERENCE Layerbuffer restraints; Not
referenced
See Alarm 565
See Alarm 565
572
HOLD
Layerbuffer restraints; Target
positon exceeds min/max limits
Target position cannot be
performed due to mechanical
obstacles or limitations
Drive movement is disabled to
prevent damage
Validate program/pattern
settings for;
- Incorrect values
- To high values
574
ABORT
Layerbuffer restraints; Inverter
offline
See Alarm 569
See Alarm 569
580
HOLD
Product formation; Passage layer
pusher blocked, photocell is
triggered
Layer pusher; Passage
blocked, photocell is triggered
Layerpusher movement
blocked by unknown object.
This is monitored by a
photocell.
Check is only done when
layerpusher is start of the
product formation
581
HOLD
Product formation; Movement
layer pusher to basic position not
possible
Layer pusher; Movement to
basic position not possible
Layer pusher cannot move
back to basic position.
This is because the product
formation already has
products on it
and the layer pusher needs to
return over the product
formation