PURSUIT DENALI 24, Руководство пользователя

Страница: 98 / 132

Denali 24
Acrylic Plastic Glass
Acrylic plastic glass scratches easily. Use a soft cloth and mild soap and water to clean acrylic glass.
Solvents and products containing ammonia can permanently damage acrylic plastic glass. A coat
of automotive or boat wax is beneficial to protect the surface. Do not use the following on acrylic
glass:
Abrasive cleaners Acetone
Solvents Alcohol
Glass cleaners Cleaners containing ammonia
Simulated Wood grain Panels
The simulated wood grain instrument and switch panels are made using a process called D-
Technik
®
. It is a three dimensional, multicolored process reproducing a complete selection of wood
grain and other noble patterns such as marble or carbon fiber. Each panel is clear coated with a
special exterior finish and hand buffed to obtain a rich deep high gloss wet look. The clear coat
is formulated for the marine environment, but basic precautions and regular care are necessary to
protect it.
DON'T:
•
Drill or cut any holes through the clear coat.
• Rub the finish using a lot of pressure.
• Use any solvent of any kind on the finish.
• Use rubbing compound of any kind on the finish.
• Use any cleaners with ammonia or an abrasive on the finish.
• Use any Scotchbrite
TM
type product on the finish.
• Use any powder abrasive such as Ajax
TM
or Soft Scrub
TM
on the finish.
Preventative Care:
Waxing the D-Technik will protect against water spots. The rain water is contaminated and if the
D-Technik panels are not waxed, water spots will be apparent. Before using your boat and at
regular intervals thereafter, we recommend waxing the D-technik panels with one of the following
products:
•
Premium marine Polish with Teflon
• Starbrite
®
#85714 for Paste Wax
• Starbrite
®
#85732 for Liquid Wax
Note: Use normal high gloss care products. For best results we recommend Teflon wax
manufactured by Starbrite
®
.
To remove water spots, wipe with mineral spirits and wax using one of the recommended products
mentioned above. Do not use use laquer thinner, acetone or any other solvent on the finish.
13-4