PURSUIT DENALI 24, Руководство пользователя

Страница: 41 / 132

Denali 24
Chapter 4:
ELECTRICAL SYSTEM
4.1 General
Your Denali is equipped with a 12-volt DC electrical system and a 110-volt AC system. The AC
system draws current from shore power outlets at dockside. The DC system draws current from
two (2) on-board batteries.
The 12-volt batteries in your boat are usually the lead-acid type. They will require similar
maintenance as those found in automobiles.
There are electrical schematics included in this manual to aid in following an individual circuit of
the boat.
4.2 12-volt System
The 12-volt system is a fairly standard system. There are two (2) batteries controlled by one (1)
battery selector switch. The batteries themselves are charged by the engine separately or
simultaneously. All 12-volt power is distributed to the 12-volt accessories through individual
circuit breakers located in the 12-volt switch panel. A main circuit breaker located near the battery
selector switch protects the system from an overload. Another circuit breaker near the selector
switch protects the circuit for the automatic float switch for the bilge pump. Most 12-volt
accessories are operated directly by switches in the helm and accessory switch panels.
PROPER FUSE OR BREAKER PROTECTION MUST BE PROVIDED FOR ALL 12-VOLT
EQUIPMENT ADDED. DO NOT OVERLOAD THE ACCESSORY CIRCUIT BREAKERS OR
OTHER CIRCUITRY THROUGH ADDITIONAL 12-VOLT EQUIPMENT.
Battery Switch
The battery selector switch is located in the engine
compartment. The switch feeds the engine and the 12-
volt accessory panel. 12-volt power can be supplied by
either battery # 1 or battery # 2 separately or by both
batteries simultaneously. The selector switch also di-
rects the charging current when the engine is operating.
Battery Switch
4-1