Installation and setup
Operator´s Manual PiCCO
2
Page
Version 3.1
C-1
C
Installation and setup
CAUTION:
The user must assure him-/herself of the safe and fully functional condition of the
equipment before using it.
1
Unpacking and inspection
Inspect the packaging for possible shipping damage. Use care when unpacking the PiCCO
2
. Retain the
packing slip and save all packing material in case the device is damaged or fails the self test and has to be
returned to the manufacturer.
WARNING:
Before using the PiCCO
2
equipment carefully read the operating instructions for the
device and the used disposables. The use of the PiCCO
2
in contradiction to the instructions in this
manual may cause undue equipment failure and possible health hazards.
Position the equipment in such a manner that neither the device nor other equipment attached to
the device can fall on the patient. Never lift or carry the device by the mains supply cable or the
cable attached to the patient.
When using the provided assembly facilities pay attention to a correct installation. The used
system must be sufficiently stable and tilt resistant as well as medically approved. In order to
ensure a secure connection with the mounting system the locking mechanism of the universal
adapter plate must be completely snapped in place.
CAUTION:
If the PiCCO
2
appears to be damaged, contact your local PULSION representative.
Do not use the PiCCO
2
if the device appears to be damaged.
If the system check detects a failure, no function will be available and “SERVICE” is displayed on
the screen. Turn the PiCCO
2
off and contact your local PULSION representative. Do not attempt to
use or repair the PiCCO
2
.