NOMEX
Operating Manual - NOMEX Multimeter Accessories
D909.131.00/02 en
79
13.1.2 Using the NOMEX Multimeter
Holder T20016
Inserting the NOMEX Multimeter into the
Holder
•
Place the NOMEX multimeter (
1
) into the
holder (
2
) as shown in
. The mea-
surement area must face up. Check that the
NOMEX multimeter properly locks into place in
the holder.
•
Connect the USB cable to the NOMEX multi-
meter.
•
Slip the USB cable into the strain relief (
5
).
Installing the Holder at the Image Receptor of
the Dental Panoramic Unit
•
Guide a Velcro fastener (
9
) through the slots
(
3
) at the holder (
2
).
•
Adapt the length of the Velcro fastener to the
dental panoramic system by using several fas-
teners.
•
Close the Velcro fastener to secure the holder
with the NOMEX multimeter at the image
receptor.
Installing the Holder on the Tripod
•
Screw the thread adapter (
8
) into the thread
(
6
).
•
To extend the length of the holder you can
screw the supporting bar (
7
) between thread
(
6
) and thread adapter (
8
).
•
Screw the complete holder onto the tripod.
